5 Causes and Ways to Overcome Roof Leaks
2023-02-28
Here are 5 Tips for Taking Care of Your Roof to Become a Sturdy Roof
2023-03-27

Understanding the Installation Procedure of Fiber Cement Roof

Installation of fiber cement roof must pay attention to matters relating to the safety standards of a building. Due to the fact that a careless installation of the fiber cement roof could result in a weak construction. When hit by severe winds or heavy rain, roof structures are vulnerable to shaking or falling.

Light steel frames can be used to build fiber cement roofing. Because the temperature variations have the potential to weaken and harm the connection between the roof and the structure. The link between the steel frame and the roof can survive for tens of years if a fiber cement roof is used.

For those of you who want to install a roof, you can read to the tips and information that will be shared below!

Preparatory Stage for Fiber Cement Roof Installation

Fiber cement roof does not require a complicated procedure for its installation, it's just that it does require some preparation and appropriate calculations. So that once installed, the zinc and aluminum roof will be solid and long-lasting.

Fiber cement roofing can be utilized for different buildings besides just the main roof of a house or other large structure. The following are the measures you can take to get ready to install a fiber cement roof.

● Calculate the Need for a Fiber Cement Roof

The first thing you have to do is find out how much fiber cement roof you need. Avoid getting too much or too little before installation. The idea is to determine the building's roof volume and create a workable drawing of sorts.

To ensure the safety of the fiber cement roof product, make sure it complies with the SNI standard. Avoid purchasing anything without the SNI standard because they pose too much of a security and financial risk.

● Creating Support Structures

The construction of this support structure is intended to provide a lighter, more stable roof frame. The supporting structure of the fiber cement roof is in the form of columns.

● Calculation of Land Area

With this one, all you have to do is figure out how much land you want a fiber cement roof to cover. To acquire a precise estimate for installing the trusses for the roof canopy, you must multiply the length by the breadth of the space.

If the pillar for the roof is between 3 and 4 meters height, make sure it is not too high. In the meantime, two layers of steel frames supported by poles must be stacked one on top of the other perpendicular to the pillar on the left. The other side, which can hold the weight of the roof, is on the right.

● Calculation of the slope of the fiber cement roof

An essential step in planning for the installation of fiber cement roofs is determining the magnitude of the roof slope. In order to avoid rainwater from collecting on the roof and flowing gently to the ground, this slope was designed.

A slope of between 25 and 30 degrees is advised. Don't forget to set a space of roughly 60 cm or the equivalent of one ring with each other.

● Calculation of Total Expenses

The next step is to calculate the amount of load that will be supported by the roof design. The type of foundation or truss that will support the roof must be strong and stable. The trusses should also be equipped with anchors or dynabolts on both sides of the supports.

● Setting up Work Equipment

Once you have completed the aforementioned calculations and preparations, it is time for you to arrange the necessary equipment and materials. Light steel, lath, an electric drill, lath bolts, specialized shears, a tape measure, an angle ruler, and of course fiber cement roof.

Don't forget to wear personal protection equipment such as goggles, work safety helmets and gloves when working on this framework. Apart from that, you also have to pay attention to processes that are in compliance with work safety. Also, you will work at heights if necessary, and for maximum safety, use a safety belt.

How To Install a Fiber Cement Roof

After knowing the various stages of preparation, then you come to the next tips on how to install a fiber cement roof.

The installation step begins with installing the roof frame, battens, trusses, and installing the roof. See the directions below for further information.

● Leveling Stage

The leveling phase comes first in installation of fiber cement roof. This one item is done to arrange so that the ring beam is in a specific place that is quite inclined and even. You can utilize water hoses and angler.

You must make sure that all of the materials are adhered to and firmly linked to the ring beam foundation frame during this leveling stage. Remember to take a measurement of the space between the easels. You accomplish this by assigning a mark to ensure that the outcomes are consistent with the design created during the planning stage for the installation of fiber cement roofs.

● Constructing the Trusses

The steps you need to take to prepare the truss frame include the ones listed below. Ensure that the trusses' right and left sides are not switched around. Just bind it with twine and a lot in the direction that is perpendicular to the beam ring.

Using the L plate and bolts, tighten the trusses that have been constructed. This prevents the trusses from shifting readily, and dynabolts may also be used as support beams if necessary.

When the trusses and beams are lined up, you can tie and join the rings to the later-to-be-installed fiber cement roof at the proper spacing.

● Roof Cover Installation

The next stage is the installation of fiber cement roofs. The thing that must be done is to re-check the trusses, whether they are suitable and parallel to the roof beam. Also make sure that the overhangs are well anchored. Install the fiber cement roof over the tassels and rafters.

To determine the batten spacing 10 - 16 x 16 HEX. It is advised to start with a one-lane installation and work your way up. The roof covering must be straight and tidy before installation so that the design does not turn out of order.

● Do Inspections

Once you've finished the aforementioned procedures, you should double-check the accuracy of your work. Are all of the installations, ties, and fasteners done in accordance with the original concept?

Is it actually safe? So, if there is a mistake or neglect during installation, there is a chance of loss. Also, you must ensure that it is installed proportionately and that no components depart from the original concept.

That describes how to apply a light steel structure to your building in order to install fiber cement roofs. Obtain the highest-quality fiber cement roof available in accordance with Indonesian National Standard (SNI), which is applicable to Djabesmen, the expert in creating robust roofs that last longer than buildings.

Get the best fiber cement roof you can afford that complies with Indonesian National Standard (SNI), which is suitable to Djabesmen, a specialist in making durable roofs that last longer than buildings.

Get the latest updates on our products and other interesting information by following official social media of Djabesmen on Instagram, Facebook, YouTube, and TikTok. Meanwhile, for pricing details, you can click here.

Leave a Reply

Your email address will not be published.

google6fbcfdd73bb6cad4.html